- کبالت
Product Description:
Components:
One 3.4 gram syringe, special series
Uses:
Treatment of tooth sensitivity following:
Method of use:
Apply an appropriate amount of cobalt desensitizing gel to the tooth and leave it for 15 to 60 minutes. Then rinse the teeth with plenty of water. Cobalt desensitizing gel is best applied to the tooth using a special tray. To do this, first make a special tray that is suitable for the patient. There is no contraindication to using a tray made for bleaching. For a complete jaw arch, approximately one third to half of the volume of a syringe is sufficient. In case of limited sensitivity of one or more teeth, place an appropriate amount of gel into a special tray made for the patient. In addition, place a little gel in the molar area to provide a grip on the tray. Gently place the tray in the mouth and remove excess gel with a cotton roll.
The frequency of using the gel depends on the severity of the patient’s sensitivity and the dentist’s recommendation.
Immediately after removing the tray, the patient should brush their teeth and rinse their mouth with water to remove any remaining gel. Swallowing any excess material should be avoided. The tray should then be carefully rinsed.
Clinical tips when working with cobalt anti-allergy gel
This product is intended for dental use only by dentists. Do not use on patients who are allergic to any of its components. Do not use on pregnant or lactating women. Close the cap after use to prevent moisture from entering the syringe.
Warnings:
Avoid swallowing the gel. If the product gets into your eyes, flush your eyes with plenty of water for 15 minutes.
Storage conditions:
Please store at 5-25°C and away from direct sunlight. Refrigeration in tropical areas will help extend the shelf life of the product.
Production of Fartak Andishe Borna Company, Iran, Tehran, Enghelab Street, Tehran University of Medical Sciences Campus, Dental Materials and Equipment Development Center, 1st Floor – Fartak Andishe Borna Company
