Cobacol is a tricalcium silicate compound improved by urethane acrylate resin, which is used as a protector/liner in the protection of pulp tissue. This product has minimal shrinkage due to its high filler content and, with its appropriate viscosity, provides the dentist with the best performance. The hydrophilic formulacinone in this product helps create a protective and stable layer for dentin.
Components:
A 1 gram syringe
Black needle head with 22 gauge
Uses:
Direct pulp cap in teeth that have been exposed due to trauma or mechanical exposure (after hemostasis has been established) Indirect pulp cap and as a liner in very deep and extensive cavities and in the vicinity of all restorations
How to use:
Direct pulp cap
1- Remove the syringe cap and place the needle tip inside the package on the syringe.
2- Isolate the tooth completely with rubber dam and remove dentinal decay. Thoroughly wash the dentin surface to remove any dentin residue.
3- Control pulpal bleeding with normal saline and sterile cotton balls and ensure that the bleeding has stopped. 4- Place a thin layer of calcium cobalt silicate liner (CobaCal) on the dentin adjacent to the exposed pulp area and 1 mm beyond it. 5- Cure the liner for 20 seconds. The thickness of the liner layer should not exceed 1 mm. If you intend to use a thicker layer, cure the product layer by layer.
After using this product, close the syringe cap and store at the appropriate temperature.
Indirect pulp cap
1- Remove the syringe cap and place the needle tip inside the package on the syringe.
2- Isolate the tooth completely with rubber dam and remove dentinal decay. Thoroughly wash the dentin surface to remove any dentin residue.
3- Place a thin layer of calcium cobalt silicate liner (CobaCal) in the deep areas of the cavity.
4- Cure the liner for 20 seconds. The thickness of the liner layer should not exceed 1 mm. If you intend to use a thicker layer, cure the product layer by layer.
After using this product, close the syringe cap and store at the appropriate temperature.
Warnings:
1- This product is designed to protect the pulp in dentin. Do not use this product on the enamel surface or at the pit margin. Avoid placing the device near the mouth.
2- Before using this product, completely control pulpal bleeding. If bleeding control fails, use alternative treatments such as root canal therapy. 3- If CobaCal is used in thicknesses greater than 1 mm, cure the material layer by layer. 4- Since calcium hydroxide and uncured methacrylate resins can cause tissue sensitivity in some individuals, avoid prolonged contact of this product with soft tissue and in case of contact with soft tissue, wash the area thoroughly with soap and water. 5- If a small amount of the product accidentally splashes into the patient’s or dentist’s eyes, rinse the eye with plenty of water and consult an ophthalmologist as soon as possible.
If the substance comes into contact with other body tissues, wash the area thoroughly with plenty of water.
6- Do not use this product after the expiration date.
Storage conditions:
1- Please store at 20-25 degrees Celsius.
2- Exposing the product to temperatures above 35 degrees and below 10 degrees can lead to phase separation in the mixture. Avoid exposing the product to the mentioned temperatures for long periods of time.
Production of Fartak Andishe Borna Company, Iran, Tehran, Enghelab Street, Tehran University of Medical Sciences Campus, Dental Materials and Equipment Development Center, 1st Floor – Fartak Andishe Borna Company
